4 in 1 Ways
Showcases
To use the rig, fill it up with water. Insert the battery into the rig and click the button three times to raise the voltage to your liking. Click the button twice to initiate sesh mode. This lasts for 15 seconds and you can also start this mode by simply holding down the button to heat and begin vapor production. To end sesh mode at any time, click the button one time.
Once you activate the unit, inhale from the mouthpiece to begin the vapor production. Press the carb once the rig is filled with vapor to release airflow. Pressing the carb down opens a hole on the cap that allows the air as well as vapor to flow freely through.
Remove the cap from the heating tip and make sure the tip has fully cooled down before removing it as it is extremely hot. To raise the voltage, click the button three times and to initiate a 15 second sesh mode click it twice. You can also start sesh mode by holding down the button to start and begin the vapor production.
Once the heating tip has been warmed to your desire, press the tip against the concentrate and gently inhale. Pressing the carb down opens hole on the cap that allows the air and vapor to flow freely through.
Once the cartridge has been connected power on the device. Click the power button 3 times to raise the voltage to your desired level.
BONUS Way to Use A Cartridge
